manualshive.com logo in svg

IBM InfoPrint 6700 Series, User Manual

Share
Download
IBM InfoPrint 6700 Series User Manual Download Page 115

QUICK SETUP Submenus

115

Media Handling

This option specifies how the printer will handle the media (labels or tag 
stock).

•

Tear-Off Strip

. Printer prints on the media and sends it out the front until 

the print buffer is empty, then positions the trailing edge of the last label 
over the tear bar for removal.

•

Tear-Off

. After each label is printed, the printer positions the label over 

the tear bar and waits for you to tear off the label before printing the next 
one (on-demand printing). A “Remove Label” message will display to 
remind you to remove the label before the next one can be printed.

•

Peel-Off

. Prints and peels die-cut labels from the liner without assistance. 

The printer waits for you to take away the label before printing the next 
one (on-demand printing). When the optional internal rewinder is installed 
with liner attached, a“Remove Label” message will display to remind you 
to remove the label before the next one can be printed.

•

Cut

. When the optional media cutter is installed, it automatically cuts 

media after each label is printed or after a specified number of labels 
have been printed when a software cut command has been issued. It cuts 
continuous roll paper, labels, or tag stock.

•

Continuous

. Printer prints on the media and sends it out the front. See 

“Continuous Mode” on page 142 for more information.

The factory default is Tear-Off Strip.

Paper Feed Shift

This option represents the distance to advance (+ shift) or pull back (– shift) 
the stop position of a label when Tear-Off Strip, Tear-Off, Peel-Off, or Cut 
media handling option is enabled. The allowable range is -0.50 inches to the 
current Label Length value setting, up to a maximum of 12.80 inches, in .01 
inch increments.

The factory default is 0.00 inches.

Label Length

This option specifies the user-selected Label Length in inches or millimeters. 
In most applications, the user-selected Label Length will match the 

physical 

label length. Physical

 

label length is the actual label length of the media 

installed.

When setting label length, consider the following:

Label Length can also be manually entered via the control panel MEDIA 
CONTROL menu or sent via host computer using the appropriate software 
command.

A Host Forms Length (Label Length) value sent from the host computer will 
override and change the manually entered Label Length value in the QUICK 
SETUP or MEDIA CONTROL menu.

Summary of Contents for InfoPrint 6700 Series

































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands