IBM InfoPrint 6700 Series, User Manual

Page: 217 / 384

Overview
217
Error Markers
(From page 188.)
•
Enable . Prints the following error markers for those elements that print
beyond the page boundaries:
>> for elements that begin off the right side of the page;
<< for elements that begin at the indicated position but end off the page;
♦
for elements where the starting position of the command contains an
error other than an off-page error.
•
Disable .
The factory default is Enable.
Error Msgs
(From page 188.)
•
Enable . Command syntax is checked and error messages printed when
command parameters are incorrect.
•
Disable . Error checking and error messages are suppressed.
The factory default is Enable.
Error Report
(From page 185.) This item sets the error reporting capability of the printer for
PGL forms as follows:
•
On . Full error checking reported. Any element that falls off the current
page is reported as an error.
•
Debug Mode . Puts the printer in debug mode whenever a form is defined
in CREATE mode. Each line of the CREATE form will be printed along
with an error if one has occurred.
•
Fault . Allows you to halt the printer if a PGL error occurs. If you select this
option, the PGL error prints on the paper, the message “IGP/PGL Error”
displays on the front panel, and the printer goes offline. You must clear
the error before the printer can resume normal operation.
•
Off . There is no error checking whatsoever. Graphic elements such as
alpha, line, barcodes, etc. will be clipped if they are beyond the page
boundaries.
The factory default is On.
Emulation Submenus