IBM Infoprint 1130, Service Manual

Page: 207 / 433

3-42
Service Manual
IBM Infoprint 1130/1140
Error Message 24x (x=Tray 1 through 5) Paper Jam Check Tray x
The paper has not cleared the pass thru sensor or reached the pass
thru sensor of the option above tray x.
Note: When the StapleSmart Finisher option is installed, a
secondary message may be displayed which advises whether or not
to remove the job from the finisher. If a job has accumulated in the
finisher, then the printer alternately flashes the primary and
secondary messages to indicate that all accumulated sheets should
not be removed during the jam clearance procedure. If the sheets
are removed, then the printer does not reprint these sheets.
Error Message 250 - Paper Jam - Check MP Feeder
The paper is jammed in the multipurpose feeder and has not
reached the base machine input sensor or has not reached the input
sensor in time.
Note: When the StapleSmart Finisher option is installed, a
secondary message may be displayed which advises whether or not
to remove the job from the finisher. If a job has accumulated in the
finisher, then the printer alternately flashes the primary and
secondary messages to indicate that all accumulated sheets should
not be removed during the jam clearance procedure. If the sheets
are removed, then the printer does not reprint these sheets.
Error Message 260 Paper Jam - Check Envelope Feeder
An envelope is jammed in the envelope feeder or has not reached
the base machine input sensor.
Error Message 27x Paper Jam - Check Bin x
Paper is jammed in output bin x (X=bin 1 thru 3). Generally this
message appears when the paper has not cleared the exit sensor in
time, has jammed in the redrive assembly or has not fed into the
output bin selected.
Note: A 271 paper jam (Bin 1) may be displayed when the
StapleSmart Finisher is installed and a piece of media is actuating
the pass thru sensor of the finisher.