IBM H Series, Installation And Service Manual

Page: 430 / 438

power cables 1-15
power distribution board removal 7-57
power supply fan removal 7-21
power supply removal 7-21
power supply test switch 7-24
power-on methods C-31
preface xv
primary console
E-8
privileged access password,
changing C-9
privileged user menus C-6
problem determination
SSA disk drive identification 5-16
SSA FRUs in the SRN table 5-2
SSA software and microcode
errors 5-2
SSA SRNs 5-1
progress indicators C-5, C-14, C-15
R
read system, POST errors C-5, C-14,
C-17
read VPDidxterm C-15
rear operating position 7-32
rear service position 7-28
rear stabilizer installation 7-5
reboot recovery C-28, C-32
related publications xv
remote latency C-27
remote timeout C-27
removal and replacement procedures
adapters 7-44
battery 7-54
CD-ROM drive.
7-62
CPU air duct 7-39
CPU card 7-40
diskette drive. 7-62
door, front of rack 7-11
fan monitor control card 7-33
front operating position 7-61
removal and replacement procedures
(continued)
front service position 7-59
hot-swap disk drive 7-13
Hot-Swappable blower
assembly 7-12
Hot-Swappable CPU fan 7-26
Hot-Swappable DASD blower 7-12
Hot-Swappable I/O blower 7-27
Hot-Swappable media blower 7-12
I/O board (Model H70) 7-52
memory cards and memory
modules 7-34
Non-Hot-Swappable SCSI disk
drive 7-62
operator panel control
assembly 7-64
power distribution board 7-57
power supply 7-21
power supply fan 7-21
rack front door 7-11
rear operating position 7-32
rear service position 7-28
SCSI backplane 7-66
second CPU air flow duct 7-38
service processor 7-43
SSA backplane 7-66
system board (Model H70) 7-50
system board and I/O board (Model
H50) 7-47
tape drive. 7-62
reset Service Processor C-11
restart recovery C-28, C-32
RETAIN C-27
retries C-27
ring indicator power-on
C-12
S
X-4
RS/6000 Enterprise Server Model H Series Installation and Service Guide