IBM H Series Installation And Service Manual Download Page 269

Page: 269 / 438

4. If you are removing a SCSI disk drive, press the Spin Down button on the drive.

Look at the green LED and wait until it stops flashing before continuing with the
next step.

5. Rotate the carrier latch to the open position.

SCSI Disk Drive

SSA Disk Drive

6. Pull the disk drive out of the drive bay, keeping it straight to prevent damage.

7. Place the disk drive in an antistatic bag.

8. Reminder: drawers with SSA disk drives must have a carrier in all positions. If

you are not exchanging the disk drive, install a blank carrier and replace the disk
drive cover.

Locked Position

Power

Ready

Check

Chapter 7. Removal and Replacement Procedures

7-15

Summary of Contents for H Series























































































































































































































































































































































































































































Search results

Summary of Contents for H Series

Reviews:

Related manuals for H Series

Brands by name

Popular brands

IBM H Series, Installation And Service Manual

Search results

Summary of Contents for H Series

Reviews:

Related manuals for H Series

Brands by name

Popular brands