IBM H Series, Installation And Service Manual

Page: 123 / 438

Table 3-1 (Page 14 of 40). Firmware Error Codes.
Error Code Description Action / Possible Failing FRU
28030003 RTC initialization required. RTC not
updating, not corrected. Replace the I/O board (See notes on 3-1.)
28030004 RTC operating parameters (data
format) changed. 1. Set/restore the time and date.
2. Refer to Action under error code
28030xxx.
28030005 RTC battery error. 1. Replace the battery.
Note: Password, Time, and Date
must be reset.
2. Refer to Action under error code
28030xxx.
28030006 Processor frequency measurement
error. Replace the I/O board (See notes on 3-1.)
Note: Replacing the battery does not
correct this error condition.
29000002 Keyboard/Mouse controller failed
self-test Replace the I/O board (See notes on 3-1.)
29A00003 Keyboard not present/detected 1. Keyboard
2. Replace the I/O board (See notes on
3-1.)
29A00004 Keyboard stuck key test failed 1. Keyboard
2. Replace the I/O board (See notes on
3-1.)
29B00004 Mouse not present/detected 1. Mouse
2. Replace the I/O board (See notes on
3-1.)
2B284A00 Illegal condition detected Contact your next level of support. Do not
replace any FRUs in an attempt to fix this
problem.
2B200402 Unsupported Processor CPU card.
2B2xxx11 Processor manually deconfigured
(H70 only) Go to Service Processor Menus and man-
ually reconfigure processors.
Use Option 3 System Information.
Use O\tion 8 to reconfigure
processors.
See error code 2B2xxx22 for descripion of
processor type.
Chapter 3. Error Code to FRU Index
3-15