Optical Fibre Channel cable restrictions:
Controllers that are FC compliant can use any external
cable length offered by IBM in any clustered or
nonclustered application.
Power cabling:
The expansion unit uses two standard
power cords. You can connect the power cords to a
primary power unit inside the rack, such as a properly
grounded ac distribution unit or uninterruptible power
supply (UPS), or to an external source, such as a properly
grounded electrical outlet.
If you have not already done so, attach the power supply
cord as follows:
1. Wrap the strain relief clamp around the power cord
approximately 20 cm (8 in.) from the power supply
connection end.
2. Attach the power supply nut and tighten it securely.
3. Connect the power cord to the power supply.
4. Plug the supply power cord into a properly grounded
electrical outlet.
5. Go to “Turning the expansion unit on and off” on
page 65 for the initial startup of the expansion unit.
82
IBM Netfinity EXP15, EXP200, EXP500 HMM
Summary of Contents for EXP15
