![background image](http://html1.mh-extra.com/html/ibm/exp15/exp15_hardware-maintenance-manual_3992345093.webp)
2. Check for Fault LEDs. If any amber LEDs are lit,
refer to “Symptom-to-FRU Index” on page 71.
Activity LED
Drive CRU
Tray handle
Latch
Fault LED
Power on LED
General system
error LED
Blank tray filler
3. Determine the bay into which you want to install the
drive.
4. Remove the blank tray.
a. Insert a finger into the square hole at the top of
the blank tray to grip and pull the tray out of the
drive bay.
b. Save the blank tray for later use.
5. Install the drive CRU:
Note
The hard disk drive comes with a tray already
attached. Do not attempt to detach the drive
4
from the tray
3
.
a. Release the blue latch
1
on the drive CRU by
pressing on the inside of the bottom of the tray
handle.
b. Pull the handle
2
on the tray out into the open
position.
Netfinity FAStT EXP500 - Type 3560
85
Summary of Contents for EXP15
