IBM Aptiva 2144, Hardware Maintenance Service

Page: 70 / 246

Table 2-1 (Page 10 of 15). POST and Advanced Diagnostics Index
for Symptoms, Messages, Error Codes, or Beeps
Symptoms, Messages, Error
Codes, or Beeps Action/FRU
Error Codes
10X - System board error or
continuous beep System board
110 - System board parity error “Memory” on page 2-30
Set memory installed in Setup Utility for
non-parity SIMMs; check parity jumper
setting. See “System Board Layout—Type
I
-1” on page 5-2 and “System Board
Layout—Type
I
-2” on page 5-5.
SIMMs
System board
111 - I/O channel parity error “Memory” on page 2-30
I/O channel memory
Riser card
System board
114 - External ROM checksum
error “Diagnostics for Factory-Installed Riser
Card, Sound Card, or Adapter Cards Not
Supported by Advanced Diagnostics” on
page 2-43
Adapter card
Riser card
System board
12X - Processor error Run the Setup Utility. See “POST Error
Codes” on page 2-3.
Processor
System board
13X - System board error Run the Setup Utility. See “POST Error
Codes” on page 2-3.
Processor
System board
161 - Low CMOS battery CMOS clock/battery (if less than 2.8 V dc)
Run the Setup Utility. See “POST Error
Codes” on page 2-3.
System board
2-20