IBM Aptiva 2144 Hardware Maintenance Service Download Page 166

Page: 166 / 246

2090—System Board

Adapter cards (2035) if applicable.

Riser card (2045).

Disconnect any cables necessary for removal.

Memory (SIMM) (2050) if applicable.

Video memory (2056) if applicable.

Cache memory (2055) if applicable.

Math coprocessor/upgrade processor (2060) if applicable.

Notes:

1. Be certain to reinstall the processor, SIMMs, optional math

coprocessor/upgrade processor, video memory, and cache memory in
the new system board if applicable.

2. When reinstalling a new system board, push the board to the rear and

place it over the front locating pin prior to installing the screws.

3. Run the Setup Utility after changing the system board.

4-40

Summary of Contents for Aptiva 2144























































































































































































































































Search results

Summary of Contents for Aptiva 2144

Reviews:

Related manuals for Aptiva 2144

Brands by name

Popular brands

IBM Aptiva 2144, Hardware Maintenance Service

Search results

Summary of Contents for Aptiva 2144

Reviews:

Related manuals for Aptiva 2144

Brands by name

Popular brands