IBM Aptiva 2144 Hardware Maintenance Service Download Page 17

Page: 17 / 246

Trademarks

The following terms are trademarks or service marks of IBM Corporation in
the United States and other countries.

The following terms are trademarks or service marks of other companies as
follows:

UNIX is a registered trademark in the United States and other countries
licensed exclusively through X/Open Company Limited.

Windows is a trademark of Microsoft Corporation.

Other company, product, and service names, which may be denoted by a
double asterisk (

), may be trademarks or service marks of others.

Aptiva
AT
IBM
OS/2

Personal System/2
PS/2
Rapid Resume
SurePath

AMD

Advanced Micro Devices, Inc.

APM

Astek International Ltd.

Aria

Prometheus Products, Inc.

Cyrix

Cyrix Corporation

FaxWorks

SofNet, Inc.

IMD

Multimedia Systems Corporation

Intel

Intel Corporation

Microsoft

Microsoft Corporation

Novell Netware

Novell, Inc.

OverDrive

Intel Corporation

Pentium

Intel Corporation

PFS:WindowWorks

Spinnaker Software Corporation

Sound Blaster

Creative Labs, Inc.

Trident

Trident Microsystems, Incorporated

Triplett

Triplett Corporation

VESA

Video Electronics Standards Association

VL-Bus

Video Electronics Standards Association

Windows NT

Microsoft Corporation

Notices

Summary of Contents for Aptiva 2144























































































































































































































































Search results

Summary of Contents for Aptiva 2144

Reviews:

Related manuals for Aptiva 2144

Brands by name

Popular brands

IBM Aptiva 2144, Hardware Maintenance Service

Search results

Summary of Contents for Aptiva 2144

Reviews:

Related manuals for Aptiva 2144

Brands by name

Popular brands