IBM Aptiva 2144, Hardware Maintenance Service

Page: 188 / 246

SIMM Configurations—Type I -2
Factory-installed SIMMs are non-parity SIMMs. However, both parity and
non-parity industry standard SIMMs are supported. When installing SIMMs,
run the Setup Utility to clear XX62 or 164 error codes.
The following are the preferred combinations of SIMMs that provide the best
performance. Each memory bank pair (Banks 0/1, Banks 2/3) must contain
a matched pair of SIMMs having the same size and speed.
Table 5-3. Gold-Contact SIMM Configurations (System Board Type
I -2)
Total
Memory J23
(Bank 0)
J24
(Bank 1)
J27
(Bank 2)
J28
(Bank 3)
8MB 4MB 4MB — —
8MB — — 4MB 4MB
16MB 4MB 4MB 4MB 4MB
16MB 8MB 8MB — —
16MB — — 8MB 8MB
24MB 4MB 4MB 8MB 8MB
24MB 8MB 8MB 4MB 4MB
32MB 8MB 8MB 8MB 8MB
32MB 16MB 16MB — —
32MB — — 16MB 16MB
40MB 4MB 4MB 16MB 16MB
40MB 16MB 16MB 4MB 4MB
48MB 8MB 8MB 16MB 16MB
48MB 16MB 16MB 8MB 8MB
64MB 16MB 16MB 16MB 16MB
64MB 32MB 32MB — —
64MB — — 32MB 32MB
72MB 4MB 4MB 32MB 32MB
72MB 32MB 32MB 4MB 4MB
80MB 8MB 8MB 32MB 32MB
84MB 32MB 32MB 8MB 8MB
96MB 16MB 16MB 32MB 32MB
96MB 32MB 32MB 16MB 16MB
128MB 32MB 32MB 32MB 32MB
5-20