IBM Aptiva 2134, Hardware Maintenance Service

Page: 34 / 266

An audio cable
Sound adapter card (on some models)
Mwave card with fax send/receive, telephone answering, speakerphone,
wavetable audio, voice-over-data, and 3D sound features. (3D sound
only with Type A-2 system board).
A CD-ROM drive system interface cable.
One pair of external speakers (model 10 or model 20).
Speaker power cable.
Microphone.
Joystick (on some models).
Hard Disk Drive
The hard disk drive is a 3.5-in. slimline IDE AT drive with “look-ahead”
cache memory and a minimum of 14 ms average access time. Access
time varies by the hard disk drive and the hard disk drive manufacturer.
Monitors
SVGA (Super Video Graphics Array) Monitors include:
– .28-mm dot pitch, digital/borderless
– Power switch.
– Up to nine user controls: contrast, brightness, horizontal control,
vertical control, horizontal size, vertical size, pin cushion, and
trapezoid. Colorpoint adjust on some models.
– Connector for a detachable grounded 3-wire power cord.
– 1.5-m (4.9-ft) or 1.8-m (5.8-ft) attached signal cable.
– Most models have auto-sensing power input for 100 V ac to
240 V ac. Some models are single voltage input or have manual
switches to select power input (110 V ac or 220 V ac).
SVGA Multi-Scanning Monitors include:
– .28-mm dot pitch multi-scanning, non-interlaced VGA, 800x600 and
1024x768 modes.
– Power switch. Some models are rated as Power Saver monitors
that reduce power consumption when Rapid Resume is enabled.
See “Parts Catalog” on page 7-1 for FRU part numbers.
– Up to seven user controls: horizontal position, vertical position,
brightness, contrast, horizontal size, and vertical size. Side
pincushion and trapezoidal control on some models.
– Connector for a detachable grounded 3-wire power cord.
– 1.5-m (4.9-ft) attached signal cable (detachable on some models).
– Single voltage input.
1-10