IBM Aptiva 2134, Hardware Maintenance Service

Page: 106 / 266

Diagnostics for Factory-Installed Riser Card, Sound
Card, or Adapter Cards Not Supported by
Diagnostics and Utilities CD
Note: While performing this check, you may need to enter and exit
Microsoft Windows 95 several times. When instructed to select an
icon or button, double-click on the item with the mouse.
For more information about using Microsoft Windows 95, see the
user’s guide provided with the computer.
If an operating system other than Microsoft Windows 95 is installed,
program screens and icons may differ from these instructions.
This diagnostics test is intended to be used only with factory-installed
adapter cards.
001
– Remove the Diagnostics and Utilities CD.
– Power-off the system unit and wait 10 seconds.
– Power-on the system unit.
IS A POST ERROR CODE DISPLAYED?
Yes No
002
Go to Step 004.
003
– Go to “Index of Symptoms, Messages, Error Codes, or Beeps” on
page 2-9.
004
(From step 002)
ARE ANY MESSAGES OR ERROR CODES DISPLAYED AFTER POST
COMPLETES BUT BEFORE MICROSOFT WINDOWS 95 STARTS?
Note: If POST does not complete, answer this question “No.”
Yes No
005
(Step 005 continues)
2-52