IBM 7378, Problem Determination And Service Manual

Page: 177 / 362

5. Unlock and remove the left-side cover (see “Removing the left-side cover” on
page 181).
6. Align the holes in the edge of the battery carrier and the adapter battery with
the holes on the ServeRAID adapter.
7. Insert the screws to secure the ServeRAID adapter battery in place.
8. Install the ServeRAID adapter on the system board (see “Installing an adapter”
on page 215).
9. Install and lock the left-side cover (see “Installing the left-side cover” on page
181).
10. Reconnect the external cables and power cords; then, turn on the attached
devices and turn on the server.
Note: You must wait approximately 3 minutes after you connect the server
power cord to an electrical outlet before the power-control button becomes
active.
Chapter 5. Removing and replacing server components
159