IBM 7378, Problem Determination And Service Manual

Page: 19 / 362

Chapter 1. Start here
You can solve many problems without outside assistance by following the
troubleshooting procedures in this
Problem Determination and Service Guide and
on the IBM Web site. This document describes the diagnostic tests that you can
perform, troubleshooting procedures, and explanations of error messages and error
codes. The documentation that comes with your operating system and software
also contains troubleshooting information.
Diagnosing a problem
Before you contact IBM or an approved warranty service provider, follow these
procedures in the order in which they are presented to diagnose a problem with
your server:
1. Determine what has changed.
Determine whether any of the following items were added, removed, replaced,
or updated before the problem occurred:
v IBM System x Server Firmware (server firmware)
v
Device drivers
v Firmware
v
Hardware components
v Software
If possible, return the server to the condition it was in before the problem
occurred.
2. Collect data.
Thorough data collection is necessary for diagnosing hardware and software
problems.
a. Document error codes and system board LEDs.
v System error codes: See “Viewing the test log” on page 98 for
information about error codes.
v
Software or operating-system error codes: See the documentation for
the software or operating system for information about a specific error
code. See the manufacturer's Web site for documentation.
v Light path diagnostics LEDs: See “Light path diagnostics” on page 90
for information about light path diagnostics LEDs that are lit.
v
System board LEDs: See “System board LEDs” on page 19 for
information about system board LEDs that are lit.
“Light path diagnostics” on page 90
b. Collect system data.
Run Dynamic System Analysis (DSA) to collect information about the
hardware, firmware, software, and operating system. Have this information
available when you contact IBM or an approved warranty service provider.
For instructions for running the DSA program, see “Running the diagnostic
programs” on page 97.
If you have to download the latest version of DSA , go to
http://www.ibm.com/systems/support/supportsite.wss/
docdisplay?brandind=5000008&lndocid=SERV-DSA or complete the
following steps.
© Copyright IBM Corp. 2014
1