Service Guide
4-42
Base Unit Battery
Note: For a translation of this safety notice, refer to the
System Unit Safety Information,
Order Number SA23-2652.
CAUTION:
A lithium battery can cause fire, explosion, or a severe burn. Do not recharge,
disassemble, heat above 100
°
C (212
°
F), solder directly to cell, incinerate, or expose
cell contents to water. Keep away from children. Replace only with the part number
specified for your system. Use of another battery may present a risk of fire or
explosion.
The battery connector is polarized; do not attempt to reverse the polarity.
Dispose of the battery according to local regulations.
Removal
1. Remove the front cover using the procedure on page 4-3.
2. Remove the operator panel using the procedure on page 4-11.
3. Disconnect the power cable of the battery from the system planar connector.
4. Remove the battery, pulling it off the loop and hook strip attached to the chassis below
the operator panel.
Battery Power Cable
Connector (mounted
on the system planar)
Battery
(loop and hook mounted)
Operator Panel
Summary of Contents for 7012 G Series
