IAI EC-RR6*AH series, Instruction Manual, Page: 288 / 348

8.4 Cleaning
8-8
8. Maintenan
ce and Inspection
8.4 Cleaning
External cleaning
● Clean exterior surfaces as necessary.
● For the rod type, if grease base oil etc. drips on the rod sliding surface
and its periphery, wipe it off with a soft cloth, etc.
● Use a soft cloth to wipe away dirt and buildup.
● Do not blow too hard with compressed air, as it may cause dust to get in through
gaps.
● Do not use petroleum-based solvents as they can harm resin and painted surfaces.
● To remove severe buildup, wipe gently with a soft cloth soaked in a neutral detergent
or alcohol.
Internal cleaning
● Use a soft cloth to wipe away dirt and buildup.
● Do not blow too hard with compressed air, as it may cause dust to get in through
gaps.
● Do not use petroleum-based solvents, neutral detergent or alcohol.