manualshive.com logo in svg

IAI EC-RR6*AH series, Instruction Manual, Page: 245 / 348

Share
Download
IAI EC-RR6*AH series Instruction Manual Download Page 245

 

5.3 Setting maintenance information 

5-4 

5. Preventive

/Predi

ctive Maintenance

 

5.3  Setting maintenance information 

 

The maintenance information can be configured and changed using the teaching pendant or PC 
software. This manual introduces operating methods using a teaching pendant TB-02. 

 

 
PC software operating method                 PC software manual (ME0155) 
Teaching pendant operating method            Teaching pendant manual (ME0355) 
Data setter operation method                  Data setter manual (ME0375) 

 

 

Switching to maintenance information window 

 

Touch "Information" on the Menu 1 screen. 
 

The screen will switch to the Information   
window. 
If the TP operation mode is not Monitor mode, 
a confirmation window will appear for   
switching to Monitor mode. 

 

 
 

Touch "Maintenance information" on the   

Information screen. 

 

     

The maintenance information window opens.

 

 

 
 

 

1 

Reference 

Action 

2 

Action 

Summary of Contents for EC-RR6*AH series





























































































































































































































































































































































Reviews:

No comments