manualshive.com logo in svg

IAI EC-RR6*AH series, Instruction Manual, Page: 127 / 348

Share
Download
IAI EC-RR6*AH series Instruction Manual Download Page 127

 

1.3 Options 

1-97 

1. S

pecifications 

 

Wireless axis operation specification (model: WL2) 

 

The wireless axis operation specification includes a built-in wireless circuit board enabling wireless 
communication between the ELECYLINDER and the Data Setter. 
Specifying WL2 enables operation testing of axis operation (movement to forward and backward 
ends, jog operation, inching operation) as well as the operation via wireless communication 
enabled with WL. However, the control device is not designed for purposes of automatic operation. 
Be sure to refer to the Precautions for Axis Operation with Wireless Communication. 
Certification and self-declaration regarding the wireless function are handled with the wireless 
circuit board model name below. 

Model name: IABL3826 

(Note)  Changes from WL to WL2 and from WL2 to WL cannot be performed by the customer. 

Please contact us. 

 

 

 

Summary of Contents for EC-RR6*AH series





























































































































































































































































































































































Reviews:

No comments