i3 International SRX PRO User Manual Download Page 88

Page: 88 / 220

This section displays the following (this info cannot be changed):

• User Name (current Windows user)

• Computer Name (configured by manufacturer)

• MAC address

• CPU Model

• Windows operating system version

• Service Pack version

• List of drives/partitions

• Total and free space information

• Total and free memory (RAM) information

1.4.8.3. Language

Two languages are currently supported on the SRX-Pro Server: English and French.

To change system language, select

English

Français

from the System Language drop-down menu. This will translate

the SRX-Pro Server interface into the appropriate language.

Click the

Save

button

to save the configured settings

Related Topics:

Main Screen

1.4.9. Video Setup

1.4.9.1. Overview

Important

This feature is not supported with IP camer-
as.

Video Setup allows configuring brightness, hue, contrast and display mode (color/ monochrome) for each video input.
The settings are applied based on camera (physical BNC connector number), not based on channel.

Video Setup

Chapter 1. SRX-Pro Server

XML to PDF by RenderX XEP XSL-FO Formatter, visit us at

http://www.renderx.com/

Summary of Contents for SRX PRO





























































































































































































































Search results

Summary of Contents for SRX PRO

Reviews:

i3 International SRX PRO, User Manual, Page: 88 / 220

Search results

Summary of Contents for SRX PRO

Reviews: