There are four ways to send an email alert:
1.
Triggered Sensor(s)
Tip
Sensors must be enabled and configured in
the Hardware Setup.
Select appropriate sensors in the
Enable Email For Sensor
frame. Whenever any of the selected sensors are
triggered, an e-mail alert will be sent to the configured e-mail address.
2.
Video Loss
Check off the
Video Loss
checkbox in the Enable Email for Video Loss frame. When video loss is detected on one
or more channels, an e-mail alert will be sent to the configured e-mail address.
3.
Scheduled Server Status
Note
A first e-mail is sent after changes to this
setting are saved and on the SRX-Pro Server
startup. The SRX-Pro Server will then send
e-mails according to the set schedule. In the
above example, every hour.
This section allows the user to configure scheduled e-mails to provide the server status. The email includes a snapshot
from the specified channel. To have the DVMS send server status e-mails, fill in
Server Status
section:
a. Check off the
Send Email
checkbox to enable server status e-mail alerts
b. Select the frequency of the automatic e-mails (1-24 hours) in the
Send Email Every
field. In the example above,
the server status email will be sent out every hour.
141
E-Mail Setup
Chapter 1. SRX-Pro Server
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at
http://www.renderx.com/