i-SENS i-Smart 300, Operator'S Manual, Page: 89 / 107

7. Maintenance
Operator’s Manual
7-8
Cleaning
Caution
 Wear appropriate personal protective clothing to prevent
infection when cleaning.
 Clean the analyzer after use or periodically.
 Do not spray cleaning solution directly onto the analyzer.
 Do not allow cleaning solution to enter the analyzer.
 Do not use force to wipe the screen.
 Prepare 0.5% hypochlorite cleaning solution immediately before
use.
 Dispose of all waste after cleaning in accordance with the
laboratory’s established procedures for disposing of biohazardous
materials.
Cleaning
Procedure
1.
Use 0.5% hypochlorite cleaning solution.
Note:

Commercial Clorox contains approximately 5% sodium
hypochlorite.

To prepare 0.5% hypochlorite solution, mix 1 part of Clorox
and 9 parts of water.
2.
Dampen a soft cloth with the cleaning solution.
3.
Using a dampened soft cloth, wipe sampler cover, screen, and
other contaminated areas on the analyzer.
4.
Allow to air-dry for about 10 minutes.
Using a soft cloth dampened with water, wipe the analyzer.
5.
Using a dry cloth, dry the surface of the analyzer.