i-SENS i-Smart 300, Operator'S Manual, Page: 37 / 107

3. Analyzer Setting
사용 설명서
3-12
Sample Setup, continued
Critical Limits
1.
Go to Menu > Setup ( Setup menu is protected by password.) >
Critical Limits Setup . The following screen will appear.
2.
Press each box and enter low and high values of the critical
limits range for each parameter.
Note:
 To delete the entered data, press Current Tab Clear .
 Before saving the setup, the analyzer will validate the entered
values to confirm that:
- Values for both low and high limits are entered.
- Low limit value is lower than high limit value.
 If any of the entered values are not valid, the analyzer will not
save the setup and ask to correct the invalid value at the setup
screen.
3.
Press Save to save the setup and go back to the main screen.
To exit to main screen without saving the changed setting, press
Close .