i-SENS i-Smart 300, Operator'S Manual, Page: 56 / 107

4. Sample Analysis
4-7
i-Smart 300 Blood Gas Analyzer
Blood Samples, continued
View Sample
Results
9.
Press Print to print out the results. A printout similar to following
will be printed.
Note:
 If the analyzer is on battery power, the printout is only available in more
than 50% battery levels.
10.
If the analyzer has been set to auto print, the analyzer will print the
results as soon as they are reported.
11.
To transmit the results to the LIS/HIS, press Send .
12.
Press Close to save the results and exit to main screen.
13.
The analyzer will go through Rinse and Cal 1 process before
returning to the Ready state for a next sample.