i-SENS i-Smart 300, Operator'S Manual, Page: 15 / 107

2. Installation
Operator’s Manual
2-2
Power Cable Connection
Caution
 Check that the power switch is in “ ” (OFF) position.
 Always connect the power according to the steps described in
this manual.
 Always use a grounded electrical outlet.
 Use only the power cord and power adapter provided by the
manufacture.
 Electrical plugs and sockets vary by countries. If necessary, use
appropriate power plug or power strips to connect the provided
power cord to the outlet.
Connect Power
Cable
1.
Plug the power cord into the socket of the power adapter.
2.
Plug the power adapter into the power port on the back of the
analyzer.
3.
Plug the power cord into an electrical outlet.