i-SENS i-Smart 300, Operator'S Manual, Page: 45 / 107

3. Analyzer Setting
Operator’s Manual
3-20
Interface Setup
Option Setup Note:

Make sure that network cable(s) is appropriately connected to the
analyzer before starting interface setup.
1.
Go to Menu > Setup ( Setup menu is protected by password.) >
Interface Setup . The following screen will appear.
2.
Check
Sample, QC , Cal 1
, and/or
Cal 2
to transmit.
3.
Select Auto or Manual from Auto & Manual Send to
automatically or manually transmit the data.
4.
Select Serial from Sending Method .