i-SENS i-Smart 300, Operator'S Manual, Page: 101 / 107

9. Specification
Operator’s Manual
9-2
Analyzer Specifications
 Internal PC: 1.6 GHz processor / 2 GB RAM / 8 GB flash storage
 Operating system: Windows® Embedded Standard 7
 Display: 8 inch TFT-LCD, touch screen
 Printer: 2 inch thermal printer (built-in)
 Printer paper: thermal paper (width: 57 mm, diameter: 50 mm)
 Barcode scanner: visible red 630 nm LED laser (built-in)
 RFID reader: 13.56MHz ISO 15693 read/write (built-in)
 Port: USB (4 ports), Serial (RS-232), LAN (RJ45 Ethernet),
VGA
 Power adapter:
- AC-DC power supplies (IEC/EN 60950-1 approved)
- Input: 100 ~ 240 V a.c., 1.5 A, 50/60 Hz
- Output: + 24 V d.c., 2.7 A
 Input power: + 24 V d.c., 2.7 A
 Internal battery: 14.8 V d.c., 4.4 Ah (Lithium-ion cells: 4S2P)
- Discharge time: maximum two hours
 Battery life:
- 20% reduced capacity for charging/discharging for 300 times.
- Replace when the capacity drops below 50% (discharging
time is less than one hour).
- The life and replacement cycle of the battery can vary
depending on operating conditions.
 Storage temperature: -20 ~ 50°C
 Storage humidity: 0 ~ 90% (relative humidity)
 Size (HxWxD): 394 mm x 257 mm x 252 mm
 Weight: 5.5kg (without accessories)
 FCC Regulatory Domain : compiled with Part 15 of FCC Rules.
Note: Operation is subject to the following two conditions;
1) this device may not cause harmful interference, and
2) this device must accept any interference received,
including interference that may cause undesired
operation.