•
Available characters:
0-9, A-Z, a-z and the following marks.
! " # $ % & ' ( ) * + , - . / : ; = ?
•
Default:
cmd
[SD memory card] - [Diag.] - [On/Off]
When the check box is checked, a trap will be sent in the following cases.
–
When a notification of the remaining capacity of SD memory card has been provided
–
When the SD memory card has become full
–
When the SD memory card cannot be recognized
•
Default:
Not checked (Off)
[SD memory card] - [Diag.] - [Trap string]
Set the string of characters to be used for the trap of [Diag.].
•
Available number of characters:
0 - 20 characters
•
Available characters:
0-9, A-Z, a-z and the following marks.
! " # $ % & ' ( ) * + , - . / : ; = ?
•
Default:
sd alarm
3.10.2.8 Configure the QoS settings
The settings relating to the Diffserv function and shaping of stream are configured in this section.
Diffserv
The Diffserv function can be used to set the priority of image/audio data sent from routers.
The priority set to this function must match the DSCP value configured to the router.
When using the Diffserv function, contact the network administrator.
[Image DSCP(0-63)]
Enter the packet priority for video data.
•
Available values:
0 - 63
•
Default:
0
[Audio DSCP(0-63)]
Enter the packet priority for audio transmission/reception.
•
Available values:
0 - 63
•
Default:
0
[TCP alarm notification DSCP(0-63)]
Enter the packet priority for TCP alarm notification.
•
Available values:
0 - 63
•
Default:
0
Shaping of stream
[Shaping of stream]
Select On/Off to determine whether or not to control the H.265 (or H.264) image data so that it does not burst.
It is effective in situations such as when a network device loses video data from the camera, but the video
display may be delayed.
•
Off:
Disables the shaping of stream function.
•
On:
Enables the shaping of stream function.
148
Operating Instructions
3 Detailed Settings
