•
Available characters:
Alphanumeric characters, the colon (:), the period (.), the underscore (_), and the
hyphen (-).
IMPORTANT
•
When entering the host name for “SMTP server address” or “POP server address”, it is necessary to
configure the DNS settings on the [Network] tab of the “Network” page. (
®
[Authentication]
•
Type
Select the authentication method to send E-mails from the following.
–
None:
It is not necessary to clear any authentication to send E-mails.
–
POP before SMTP:
It is necessary to first clear the POP server authentication to use the SMTP server
to send E-mails.
–
SMTP:
It is necessary to clear the SMTP server authentication to send E-mails.
–
Default:
None
Note
•
When you don’t know the authentication method to send E-mails, refer to the network administrator.
•
User name
Enter the user name to access the server.
–
Available number of characters:
0 - 32 characters
–
Unavailable characters:
" & : ; \
•
Password
Enter the password to access the server.
–
Available number of characters:
0 - 128 characters
–
Unavailable characters:
" &
[Sender’s E-mail address]
Enter the E-mail address of a sender.
The entered E-mail address will be displayed in the “From” (sender) line of the sent E-mails.
•
Available number of characters:
3 - 128 characters
•
Available characters:
Alphanumeric characters, the at sign (@), the period (.), the underscore (_), and
the hyphen (-).
[SSL]
Select “On” if you want to use SSL encryption when sending E-mail notifications for alarm occurrences or the
“Diag.” function. When you select “On”, the authentication method will be set to “SMTP”. Set the user name
and the password used for authentication.
•
Default:
Off
Note
•
Some SMTP servers may not support SSL.
•
SSL supports SMTP over SSL, but STARTTLS is not supported.
•
When “On” is selected, the SMTP port number may need to be set to 465. Ask your Internet service
provider for the appropriate settings.
[Address 1] - [Address 4]
Enter the destination E-mail address. Up to 4 destination E-mail addresses can be registered.
•
Available number of characters:
3 - 128 characters
•
Available characters:
Alphanumeric characters, the at sign (@), the period (.), the underscore (_), and
the hyphen (-).
Operating Instructions
135
3 Detailed Settings
