[Status]
Select “On” or “Off” to determine whether or not to perform SCD.
•
On:
Performs SCD.
•
Off:
Does not performSCD.
•
Default:
Off
[Detection area]
Set the detection ratio “Small”, “Middle” or “Large”, which specifies how much of change in the area set in
[SCD area] to be detected.
•
Default:
Middle
[Detection sensitivity]
Adjust the SCD sensitivity in the SCD area and select from “Very Low”, “Low”, “Middle”, or “High”.
•
Default:
Middle
[Detection time]
The SCD function issues an alarm when the scene change continues for a specified time of period.
3s/5s/10s/30s/1min
•
Default:
3s
[Delete] button
Click the [Delete] button to be deleted the selected area.
SCD information addition
[Information addition]
Select “On” or “Off” to determine whether or not to add SCD information to superimposed image data.
•
Default:
Off
Note
•
Additional SCD information will not be used on our network disk recorders. (As of June, 2021)
Operating Instructions
115
3 Detailed Settings
