Common
[HTTP port]
Assign the port numbers independently.
•
Available port number:
1 - 65535
•
Default:
80
The following port numbers are unavailable since they are already in use.
20, 21, 22, 23, 25, 42, 53, 67, 68, 69, 110, 123, 161, 162, 443, 554, 995, 10669, 10670, 59000 - 61000
Note
•
Some ports may not be accessible depending on the browser. If you cannot access to the camera from
the browser, please access to the camera via HTTPS or change the HTTP port number of the camera
using iCT.
[Line speed]
Select the line speed for data transmission from the following. It is recommended to use with the default
“Auto”.
•
Auto:
Line speed will be applied automatically.
•
100M-Full:
100 Mbps full-duplex
•
100M-Half:
100 Mbps half-duplex
•
10M-Full:
10 Mbps full-duplex
•
10M-Half:
10 Mbps half-duplex
•
Default:
Auto
[Max RTP packet size]
Select “Unlimited(1500byte)” or “Limited(1280byte)” to determine whether or not to restrict the RTP packet size
when viewing images from the camera using the RTP protocol. It is recommended to use with the default
“Unlimited(1500byte)”.
When the RTP packet size is restricted in the network line in use, select “Limited(1280byte)”. Refer to the
network administrator for further information about the maximum packet size in the network line.
•
Default:
Unlimited(1500byte)
[HTTP max segment size(MSS)]
Select “Unlimited(1460byte)”, “Limited(1280byte)”, or “Limited(1024byte)” to determine whether or not to
restrict the maximum segment size (MSS) when viewing images from the camera using the HTTP protocol.
We recommended that you use this feature with the default setting.
When the MSS is restricted in the network line in use, select “Limited(1024byte)” or “Limited(1280byte)”. Refer
to the network administrator for further information about the MSS in the network line.
•
Default:
Unlimited(1460byte)
[Bandwidth control(bit rate)]
Select the total bit rate for data transmission from the following.
Unlimited/ 64kbps/ 128kbps/ 256kbps/ 384kbps/ 512kbps/ 768kbps/ 1024kbps/ 2048kbps/ 4096kbps/
6144kbps/ 8192kbps/ 10240 kbps/ 15360 kbps/ 20480 kbps/ 25600 kbps/ 30720kbps/ 35840kbps/ 40960 kbps/
51200kbps
•
Default:
51200kbps
Note
•
When selecting “64kbps”, select “Off” for “Audio transmission mode” on the [Audio] tab.
(
®
“3.6.5 Configure the settings relating to audio [Audio]”)
•
When “Bandwidth control(bit rate)” is set low, taking a picture using the snap shot button may not
function depending on the usage environment. In this case, select “JPEG” on the “Live” page and take
a picture with the snap shot button using the lowest possible image capture size.
132
Operating Instructions
3 Detailed Settings
