USER
MANUAL
HC1151
W
ARNINGS
A.3
7845436-01 11/18
subject to change without notice
LIFTING COMPONENT
- Excessive forces if lifting components other than hook are used
IP PROTECTION LEVEL
- Electric system faults (safety and controls)
WARNINGS
- Do NOT use the crane if the operating conditions are incompatible with the instructions given in
this manual. Specifically, the user must contact the manufacturer of the crane in the event of
environmental temperatures outside the range indicated in this manual.
- Handling of loads at heights requires full risk assessment: strictly adhere to the load charts and
always fully extend the stabilizers.
- Clear any snow or ice from the crane arms to prevent excessive stress caused by the extra weight
and to ensure that movement of telescopic components is not affected.
- Contact an authorised assistance centre before using or transporting the crane in a marine
environment.
- The lifting component to which the diagrams refer in this manual is the crane hook. If other lifting
components are to be used the user must contact an authorised assistance centre to obtain
dedicated load diagrams.
- Maintenance on the machine which requires welding or grinding is forbidden. Refer to an
authorised Service Centre if repairs or modifications to metalwork are required.
