USER
MANUAL
HC1151
W
ARNINGS
A.15
7845436-01 11/18
subject to change without notice
A.9
UNEXPECTED START-UP AND SWITCH-OFF OF THE CRANE
Impact, crushing, load loss and stability loss hazards exist as a result of accidental crane start-up
and switch-off.
WARNINGS
- Before using the crane check that there is enough fuel and that the battery is in good condition.
- Those using the crane must be in full control of the machine with control and stop devices in easy
reach from the moment of start-up.
- Control and maintenance operations must be performed with the machine and engine switched
OFF, the brake ON and wheels blocked using special chocks
A.10
SAFETY DEVICE FAULTS
Tampering with safety devices can cause excessive stress on the crane, loss of stability, impact,
falling loads, sudden release of the lifting components and manual extensions, accidents when
moving the vehicle, etc.
Imperfect closure of the crane when moving the vehicle can cause serious damage due to impact
of protruding components against various objects (bridges, garages, other vehicles, etc.).
Failure to apply decals to the machine may cause the operator not to take into consideration
hazards associated with normal crane use.
WARNINGS
- Do NOT remove, modify or disable safety devices be they mechanical (guards, locks, etc.) or
hydraulic (valves, seals). Failure to abide by this regulation shall cause the warranty to be
declared null and void.
- Make sure lifting components are not supporting a load and are resting on a suitable support
surface before disconnecting them.
- Do NOT tamper with or remove warning stickers. Do NOT clean the stickers with solvents. Do
NOT use water or steam under pressure to clean the machine.
