USER
MANUAL
HC1151
U
SE
B.27
7845436-01 11/18
subject to change without notice
2) Retract the stabilizer extension, but not completely: keep the extension extracted a few
centimeters (10 cm are enough) in such a way that the leg can rotate freely and you can operate the
disengaging lever and the stabilizer control levers at the same time.
3) Keep the disengaging lever pulled and, at the same time, turn upwards a little bit the stablizer leg:
the locking pin is disengaged and then you can release the disengaging lever.
4) Turn upwards the stabilizer leg till the leg stops in vertical position at end of stroke.
