manualshive.com logo in svg

Hyundai IX35 2014, Owner'S Manual

Share
Download
Hyundai IX35 2014 Owner'S Manual Download Page 995

1 3

Introduction

Petrol containing alcohol and
methanol

Gasohol, a mixture of petrol and ethanol
(also known as grain alcohol), and petrol
or gasohol containing methanol (also
known as wood alcohol) are being mar-
keted along with or instead of leaded or
unleaded petrol.
Do not use gasohol containing more than
10% ethanol, and do not use petrol or
gasohol containing any methanol. Either
of these fuels may cause drivability prob-
lems and damage to the fuel system.
Discontinue using gasohol of any kind if
drivability problems occur.
Vehicle damage or driveability problems
may not be covered by the manufactur-
er’s warranty if they result from the use
of:
1. Gasohol containing more than 10%

ethanol.

2. Petrol or gasohol containing methanol.
3. Leaded fuel or leaded gasohol.

Use of MTBE

HYUNDAI recommends avoiding fuels
containing MTBE (Methyl Tertiary Butyl
Ether) over 15.0% vol. (Oxygen Content
2.7% weight) in your vehicle.
Fuel containing MTBE over 15.0% vol.
(Oxygen Content 2.7% weight) may
reduce vehicle performance and produce
vapour lock or hard starting.

Do not use methanol

Fuels containing methanol (wood alco-
hol) should not be used in your vehicle.
This type of fuel can reduce vehicle per-
formance and damage components of
the fuel system.

WARNING 

• Do not "top off" after the nozzle

automatically shuts off when
refuelling.

• Always check that the fuel cap is

installed securely to prevent fuel
spillage in the event of an acci-
dent.

CAUTION

Never use gasohol which contains
methanol. Discontinue use of any
gasohol product which impairs dri-
vability.

CAUTION

Your New Vehicle Limited Warranty
may not cover damage to the fuel
system and any performance prob-
lems that are caused by the use of
fuels containing methanol or fuels
containing MTBE (Methyl Tertiary
Butyl Ether) over 15.0% vol.
(Oxygen Content 2.7% weight.)

EL(FL) UK 1.QXP  8/5/2013  6:21 PM  Page 3

procarmanuals.com

Summary of Contents for IX35 2014































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands