manualshive.com logo in svg

Hyundai IX35 2014, Owner'S Manual

Share
Download
Hyundai IX35 2014 Owner'S Manual Download Page 1194

4 123

Features of your vehicle

✽

✽

NOTICE

• Replace the filter according to the

Maintenance Schedule.
If the car is being driven in severe
conditions such as dusty, rough roads,
more frequent climate control air fil-
ter inspections and changes are
required.

• When the air flow rate suddenly

decreases, we recommend that the
system be checked by a HYUNDAI
authorised repairer.

Checking the amount of air con-
ditioner refrigerant and compres-
sor lubricant

When the amount of refrigerant is low,
the performance of the air conditioning is
reduced. Overfilling also has a bad influ-
ence on the air conditioning system.
Therefore, if abnormal operation is
found, we recommend that the system be
inspected by a HYUNDAI authorised
repairer.

✽

✽

NOTICE

It is important when servicing the air
conditioning system that the correct
type and amount of oil and refrigerant is
used. Otherwise, damage to the com-
pressor and abnormal system operation
may occur. 

WARNING

Improper service may cause seri-
ous injury to the person performing
the service. For more detailed infor-
mation, we recommend that you
contact a HYUNDAI authorised
repairer.

EL(FL) UK 4A.QXP  8/5/2013  6:45 PM  Page 123

procarmanuals.com

Summary of Contents for IX35 2014































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands