manualshive.com logo in svg

Hyundai IX35 2014, Owner'S Manual

Share
Download
Hyundai IX35 2014 Owner'S Manual Download Page 734

Features of your vehicle

244

4

✽

✽

NOTICE - USING THE Voice

Recognition

• When using the voice recognition fea-

ture, only commands listed within the
user's manual are supported.

• Be aware that during the operation of

the voice recognition system, pressing
any key other than the 

key or

touching the screen will terminate
voice recognition mode.

• For superior voice recognition per-

formance, position the microphone
used for voice recognition above the
head of the driver’s seat and maintain
a proper position when saying com-
mands.

• Within the following situations, voice

recognition may not function properly
due to external sound.
- When the windows and sunroof are

open

- When the wind of the cooling / heat-

ing device is strong

- When entering and passing through

tunnels

- When driving on rugged and uneven

roads

- During severe rain (heavy rains,

windstorms)

(Continued)

(Continued)
• Phone related voice commands can be

used only when a 

Bluetooth

®

Wireless

Technology device is connected.

• When making calls by stating a name,

the corresponding contact must be
downloaded and stored within the
audio system.

• After downloading the 

Bluetooth

®

Wireless Technology phone book, it
takes some times to convert the phone
book data into voice information.
During this time, voice recognition
may not properly operate.

• Pronounce the voice commands natu-

rally and clearly as if in a normal con-
versation.

EL(FL) Eng 4B AUDIO.QXP  7/11/2013  11:21 AM  Page 244

procarmanuals.com

Summary of Contents for IX35 2014































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands