manualshive.com logo in svg

Hyundai IX35 2014, Owner'S Manual

Share
Download
Hyundai IX35 2014 Owner'S Manual Download Page 186

Features of your vehicle

114

4

Automatic heating and air condi-
tioning

1. Press the AUTO button.
The modes, fan speeds, air intake and
air-conditioning will be controlled auto-
matically by setting the temperature.

2. Set the temperature button to the

desired temperature.

✽

✽

NOTICE

• To turn the automatic operation off,

select any button of the following:
- Mode selection button
- Front windscreen defroster button
- Fan speed control button
The selected function will be con-
trolled manually whilst other func-
tions operate automatically.

• For your convenience and to improve

the effectiveness of the climate con-
trol, use the AUTO button and set the
temperature to 22°C/71°F.

✽

✽

NOTICE

Never place anything over the sensor
located on the instrument panel to
ensure better control of the heating and
cooling system.

OLM049154

OEL043125R

OEL049122R

EL(FL) Aust 4a.QXP  7/26/2013  2:38 PM  Page 114

procarmanuals.com

Summary of Contents for IX35 2014































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands