manualshive.com logo in svg

Hyundai IX35 2014, Owner'S Manual

Share
Download
Hyundai IX35 2014 Owner'S Manual Download Page 24

3 11

Safety features of your vehicle

Seatback pocket 

The seatback pocket is provided on the
back of the front passenger’s and driver’s
seatbacks.

WARNING

- Seat warmer

burns

Passengers should use extreme
caution when using seat warmers
due to the possibility of excess
heating or burns. The seat warmer
may cause burns even at low tem-
peratures, especially if used for
long periods of time. In particular,
the driver must exercise extreme
care for the following types of pas-
sengers:
1. Infants, children, elderly or hand-

icapped persons, or hospital out-
patients

2. Persons with sensitive skin or

those that burn easily

3. Fatigued individuals
4. Intoxicated individuals
5. Individuals taking medication

that can cause drowsiness or
sleepiness (sleeping pills, cold
tablets, etc.)

OEL039015

WARNING

- 

Seatback
pockets

Do not put heavy or sharp objects
in the seatback pockets. In an acci-
dent they could come loose from
the pocket and injure vehicle occu-
pants.

EL(FL) Aust 3.QXP  7/26/2013  2:04 PM  Page 11

procarmanuals.com

Summary of Contents for IX35 2014































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands