manualshive.com logo in svg

Hyundai IX35 2014, Owner'S Manual

Share
Download
Hyundai IX35 2014 Owner'S Manual Download Page 1303

Features of your vehicle

232

4

✽

✽

NOTICE - USING UPON

CONNECTING 

Bluetooth

®

Wireless Technology  PHONE

• Before connecting the car audio sys-

tem with the mobile phone, check to
see that the mobile phone supports

Bluetooth

®

Wireless Technology fea-

tures.

• Even if the phone supports 

Bluetooth

®

Wireless Technology, the phone will
not be found during device searches if
the phone has been set to hidden state
or the 

Bluetooth

®

Wireless Technology

power is turned off. Disable the hid-
den state or turn on the 

Bluetooth

®

Wireless Technology power prior to
searching/connecting with the car
audio system.

(Continued)

(Continued)
• If you do not want to automatically

connect your

Bluetooth

®

Wireless

Technology phone, try the following.
1. Turn off the 

Bluetooth

®

Wireless

Technology feature in your mobile
phone.

- For more information on 

Bluetooth

®

Wireless Technology features within
your mobile, refer to your mobile
phone user’s manual.

2. Turn off the 

Bluetooth

®

Wireless

Technology feature in your car
audio system.

- To turn off the 

Bluetooth

®

Wireless

Technology feature in your car
audio system, go to 

>

[Phone] and [turn off] the

Bluetooth

®

Wireless Technology fea-

ture.

• Park the vehicle when connecting the

car audio system with your mobile
phone.

(Continued)

(Continued)
•

Bluetooth

®

Wireless Technology con-

nection may become intermittently
disconnected in some mobile phones.
Follow these steps to try again.
1. Turn  the 

Bluetooth

®

Wireless

Technology function within the
mobile phone off/on and try again.

2. 

Turn the mobile phone power
Off/On and try again.

3 

Completely remove the mobile
phone battery, reboot, and then
again.

4. Reboot the audio system and try

again.

5. Delete all paired devices, pair and

try again.

• The Handsfree call volume and quali-

ty may differ depending on the mobile
phone. 

(Continued)

SETUP 

EL(FL) UK 4B AUDIO.QXP  7/15/2013  10:21 AM  Page 232

procarmanuals.com

Summary of Contents for IX35 2014































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands