manualshive.com logo in svg

Hyundai IX35 2014, Owner'S Manual

Share
Download
Hyundai IX35 2014 Owner'S Manual Download Page 227

Driving your vehicle

22

5

Shift-lock override

If the shift lever cannot be moved from
the P (Park) or N (Neutral) position into R
(Reverse) position with the brake pedal
depressed, continue depressing the
brake, then do the following:

Type A
1. Press the shift-lock release button.
2. Move the shift lever.
3. We recommend that the system be

inspected by an authorised HYUNDAI
dealer.

Type B
1. Carefully remove the cap (1) covering

the shift-lock override access hole.

2. Insert a screwdriver into the access

hole and press down on the screwdriv-
er.

3. Move the shift lever.
4. We recommend that the system be

inspected by an authorised HYUNDAI
dealer.

Ignition key interlock system 
(if equipped)

The ignition key cannot be removed
unless the shift lever is in the P (Park)
position. Even the ignition switch is in
LOCK position, the key cannot be
removed.

OEL059011R

OEL053013R

■

Type A

■

Type B

EL(FL) Aust 5.QXP  7/26/2013  2:08 PM  Page 22

procarmanuals.com

Summary of Contents for IX35 2014































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands