manualshive.com logo in svg

Hyundai IX35 2014, Owner'S Manual

Share
Download
Hyundai IX35 2014 Owner'S Manual Download Page 684

Features of your vehicle

194

4

SYSTEM CONTROLLERS AND

FUNCTIONS 

❈ 

Display and settings may differ
depending on the selected audio.

Audio Head Unit 

1.

(EJECT)

• Ejects the disc.

2.
• Converts to Radio(FM/AM) mode.

•

Each time the key is pressed,the mode
is changed in order of FM1 

➟

FM2 

➟

FMA 

➟

AM 

➟

AMA.

3.
• Start Media mode
• Each time the key is pressed, the mode

is changed in order of CD, USB(iPod

®

)

AUX, My Music, BT Audio.

4.
• Converts to Phone mode

❈

When a phone is not connected, the

connection screen is displayed.

5. PWR/VOL knob
• 

Power : Press to turn power on/off.

• 

Volume : Turn left/right to control vol-

ume.

6.
• When pressed shortly(under 0.8 sec-

onds)

- Radio mode : plays previous/next fre-

quency.

- Media (CD/USB/iPod

®

/My Music) modes

: changes the track, Song(file)

• When pressed and held (0.8 seconds)
- Radio mode : continuously changes the

frequency. Upon release, plays the cur-
rent frequency.

- Media(CD/USB/iPod

®

/My Music) modes

: rewinds or fast forwards the track or file

- During a Handsfree call, controls the

call volume.

7.
• RDS Radio mode : searches RDS pro-

gram types.

• CD/USB/MP3 modes : searches fold-

ers.

8. RESET
• Forced system termination and system

restart.

PTY

FOLDER

SEEK

TRACK

PHONE

MEDIA

RADIO

EL(FL) Eng 4B AUDIO.QXP  7/11/2013  11:20 AM  Page 194

procarmanuals.com

Summary of Contents for IX35 2014































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands