manualshive.com logo in svg

Hyundai IX35 2014, Owner'S Manual

Share
Download
Hyundai IX35 2014 Owner'S Manual Download Page 195

4 123

Features of your vehicle

These compartments can be used to
store small items required by the driver
or passengers.

Centre console storage 
(if equipped)

These compartments can be used to
store small items required by the driver
or front passenger.
To open the centre console storage pull
up the lever.

Glove box 

The glove box can be locked and
unlocked with a key. (if equipped)
To open the glove box, pull the handle
and the glove box will automatically
open. Close the glove box after use.

STORAGE COMPARTMENT 

WARNING

- 

Flammable
materials

Do not store cigarette lighters,
propane cylinders, or other flamma-
ble/explosive materials in the vehi-
cle. These items may catch fire
and/or explode if the vehicle is
exposed to hot temperatures for
extended periods.

CAUTION

• To avoid possible theft, do not

leave valuables in the storage
compartment.

• Always keep the storage com-

partment covers closed whilst
driving. Do not attempt to place
so many items in the storage
compartment that the storage
compartment cover can not close
securely. 

WARNING 

To reduce the risk of injury in an
accident or sudden stop, always
keep the glove box door closed
whilst driving.

CAUTION

Do not keep food in the glove box
for a long time.

OLM049152R

OEL049151/H

EL(FL) Aust 4a.QXP  7/26/2013  2:39 PM  Page 123

procarmanuals.com

Summary of Contents for IX35 2014































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands