manualshive.com logo in svg

Hyundai IX35 2014, Owner'S Manual

Share
Download
Hyundai IX35 2014 Owner'S Manual Download Page 672

Features of your vehicle

182

4

✽

✽

NOTICE - 

USING THE

Bluetooth

®

Wireless Technology

CELLULAR PHONE

• Do not use a cellular phone or per-

form 

Bluetooth

®

Wireless Technology

settings (e.g. pairing a phone) while
driving.

• Some 

Bluetooth

®

Wireless Technology

-enabled phones may not be recog-
nized by the system or fully compati-
ble with the system.

• Before using 

Bluetooth

®

Wireless

Technology related features of the
audio system, refer your phone’s
User’s Manual for

phone-side

Bluetooth

®

Wireless Technology oper-

ations.

• The phone must be paired to the audio

system to use 

Bluetooth

®

Wireless

Technology related features.

• You will not be able to use the hands-

free feature when your phone (in the
car) is outside of the cellular service
area (e.g. in a tunnel, in a under-
ground, in a mountainous area, etc.).

(Continued)

(Continued)
• If the cellular phone signal is poor or

the vehicles interior noise is too loud,
it may be difficult to hear the other
person’s voice during a call.

• Do not place the phone near or inside

metallic objects, otherwise communi-
cations with 

Bluetooth

®

Wireless

Technology system or cellular service
stations can be disturbed.

• While a phone is connected through

Bluetooth

®

Wireless Technology your

phone may discharge quicker than
usual for

additional 

Bluetooth

®

Wireless Technology-related opera-
tions.

• Some cellular phones or other devices

may cause interference noise or mal-
function to audio system. In this case,
store the device in a different location
may resolve the condition. 

• Phone contact names should be saved

in English or they may not be dis-
played correctly.

(Continued)

(Continued)
• If Priority is set upon vehicle igni-

tion(IGN/ACC ON), the 

Bluetooth

®

Wireless Technology phone will be
automatically connected.
Even if you are outside, the 

Bluetooth

®

Wireless Technology phone will be
automatically connected once you are
in the vicinity of the vehicle.
If you do not want automatic

Bluetooth

®

Wireless Technology con-

nection, turn the 

Bluetooth

®

Wireless

Technology feature off.

• The hands-free call volume and quali-

ty may differ depending on the mobile
phone type.

•

Bluetooth

®

Wireless Technology fea-

tures can be used only when the
mobile phone has been paired and
connected with the device. For more
information on pairing and connect-
ing 

Bluetooth

®

Wireless Technology

enabled mobile phones, refer to the
“Phone Setup” section.

(Continued)

EL(FL) Eng 4B AUDIO.QXP  7/11/2013  11:20 AM  Page 182

procarmanuals.com

Summary of Contents for IX35 2014































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands