manualshive.com logo in svg

Hyundai IX35 2014, Owner'S Manual

Share
Download
Hyundai IX35 2014 Owner'S Manual Download Page 546

Features of your vehicle

56

4

User Settings Mode

Description

On this mode, you can change setting of
the doors, lamps, and so on.

Door

Auto Door Lock (if equipped)

• Off:

The auto door lock operation will be
deactivated.

• Speed:

All doors will be automatically locked
when the vehicle speed exceeds
15km/h (9.3mph).

• Shift Lever:

All doors will be automatically locked if
the automatic transaxle shift lever is
shifted from the P (Park) position to the
R (Reverse), N (Neutral), or D (Drive)
position.

Auto Door Unlock (if equipped)

• Off:

The auto door unlock operation will be
canceled.

• Key Out or Power Off:

All doors will be automatically unlocked
when the ignition key is removed from
ignition switch or Engine Star/Stop
Button is set to the OFF position.

• Driver Door Unlock:

All doors will be automatically unlocked
if the driver's door is unlocked.

• Shift Lever:

All doors will be automatically unlocked
if the automatic transaxle shift lever is
shifted to the P (Park) position.

OLM043406E

EL(FL) Eng 4A.QXP  7/11/2013  11:33 AM  Page 56

procarmanuals.com

Summary of Contents for IX35 2014































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands