manualshive.com logo in svg

Hyundai IX35 2014, Owner'S Manual

Share
Download
Hyundai IX35 2014 Owner'S Manual Download Page 224

5 19

Driving your vehicle

For smooth operation, depress the brake
pedal when shifting from N (Neutral) to a
forward or reverse gear.

Transaxle ranges

The indicator lights in the instrument
cluster displays the shift lever position
when the ignition switch is in the ON
position.

P (Park)

Always come to a complete stop before
shifting into P (Park). This position locks
the transaxle and prevents the front
wheels from rotating.

WARNING

- Automatic

transaxle

• Always check the surrounding

areas near your vehicle for peo-
ple, especially children, before
shifting a vehicle into D (Drive) or
R (Reverse).

• Before leaving the driver’s seat,

always make sure the shift lever
is in the P (Park) position; then
set the parking brake fully and
shut the engine off. Unexpected
and sudden vehicle movement
can occur if these precautions
are not followed in the order iden-
tified.

CAUTION

• To avoid damage to your

transaxle, do not accelerate the
engine in R (Reverse) or any for-
ward gear position with the
brakes on.

• When stopped on an upgrade, do

not hold the vehicle stationary
with engine power. Use the serv-
ice brake or the parking brake.

• Do not shift from N (Neutral) or P

(Park) into D (Drive),

or R

(Reverse) when the engine is
above idle speed.

EL(FL) Aust 5.QXP  7/26/2013  2:08 PM  Page 19

procarmanuals.com

Summary of Contents for IX35 2014































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands