![background image](http://html.mh-extra.com/html/hyundai/hyps36li/hyps36li_user-manual_2197297013.webp)
4.1.1.
Starting, stopping and restarting the motor repeatedly within a few seconds can generate a
great deal of heat and damage the motor. To protect the life of your cordless pole chain
always wait at least five seconds after stopping before restarting the saw.
4.1.2.
A good firm grip on the tool using both hands will help you maintain control. When using
the pole chain saw, place one hand on the front handle foam grip and the other hand on the
rear handle with your thumbs and fingers encircling the pole and handle. A firm combined
with proper positioning of the handle against your body will help you maintain control of the
saw. Do not let go of the pole chain saw while it is in operation.
4.1.3.
Do not use the pole chain saw under wet conditions. Use extreme caution when cutting
small brush, saplings or limbs under tension because slender and tense material may catch the
saw and be whipped toward you, pull you off balance or spring back.
4.1.4.
Do not use the pole chain saws to cut vines and/or small underbrush.
Kickback may occur when the moving chain contacts an object at the upper
portion of the tip of the guide bar or when the wood closes in and pinches the
chain saw in the cut (Fig. 13). Contact at the upper portion of the tip of the guide
bar can cause the chain to dig into the object and stop the chain for an instant. The
result is a lightning-fast reverse reaction, which kicks the guide bar up and back
toward the operator. If the chain saw is pinched along the top of the guide bar, the
guide bar can be driven rapidly back toward the operator. Either of these reactions
can cause loss of saw control, which can throw the operator off balance and result
in serious injury. Do not rely upon the safety devices built into the saw. As a user,
you should take several precautions to keep your cutting jobs free from accident or
injury.
Do not cut trees near electrical wires.
Do not let familiarity with this type of tool prevent you from taking all necessary
precautions? Remember that a careless fraction of a second is sufficient to inflict
serious injury.
The chain will continue to run for several seconds after turning OFF the tool.
Do not operate the pole chain saw in a tree, on a ladder or on a scaffold. Using the
tool under such circumstances is extremely dangerous.
Keep hands away from the chain. Keep hands on the handles. Do not overreach.
Be certain that the chain is not in contact with any object when you start the
motor.
It is normal for oil to seep from the saw when not in use. To prevent seepage,
empty the oil tank after each use. When storing the unit for a long period of time
(3 months or longer), be sure the chain is lightly lubricated; this will prevent rust
on the chain and bar sprocket.
Page 13
Ver 2
Summary of Contents for HYPS36LI
Page 1: ......