![background image](http://html.mh-extra.com/html/hyundai/hyps36li/hyps36li_user-manual_2197297022.webp)
6.6.
Guide bar maintenance.
6.6.1.
When the guide bar shows signs of wear, turn it over on the saw to distribute the wear for
maximum bar life. Feathering or burring of the bar rails is a normal process of bar wear. You
should smooth such faults with a file as soon as they occur.
6.6.2.
Replace a bar with any of the following faults;
6.6.2.1.
Wear inside the bar rails permitting the chain to lay over sideways;
6.6.2.2.
Bent guide bar;
6.6.2.3.
Cracked or broken rails;
6.6.2.4.
Spread rails.
6.6.3.
Turn the saw over, check the underside of the guide bar and make sure that the lubrication
holes and chain groove are free from impurities.
6.7.
Chain sprocket.
6.7.1.
Regularly check the condition of the sprocket and replace it when wear exceeds 0.5 mm
(Fig. 30).
6.7.2.
Do not mount a new chain with a worn sprocket or vice-versa.
6.8.
Daily Checklist, Cleaning and Storage.
6.8.1.
Daily checklist.
6.8.1.1.
To help maintain your cordless pole chain saw for optimum performance, we
recommend you complete this checklist prior to each work session.
6.8.1.1.1.
Inspect for any visible damage to the chain, guide bar or motor housing
motor housing.
6.8.1.1.2.
Inspect the oil port and guide bar rails and clean them to remove any debris.
6.8.1.1.3.
Check the chain tension.
6.8.1.1.4.
Check the chain teeth for sharpness.
6.8.1.1.5.
Check the bar and chain oil level; fill with new chain oil specifically
formulated for chain saws.
6.8.2.
Noises.
6.8.2.1.
If you notice anything unusual, such as a vibration or odd sound, shut the saw OFF
immediately. Remove the battery and check the saw for any damage.
Do not insert the battery until you have completed all of the daily checks.
Page 22
Ver 2
Summary of Contents for HYPS36LI
Page 1: ......