![background image](http://html.mh-extra.com/html/hyundai/hyps36li/hyps36li_user-manual_2197297023.webp)
6.9.
Cleaning.
6.9.1.
Use only mild soap and a damp cloth to clean the pole chain saw. Never let any liquid get
inside the motor housing and NEVER immerse any part of the saw housing in liquid.
6.10.
Storage.
6.10.1.
Make sure the guide bar cover is in place when storing.
6.10.2.
Do not store the pole chain saw near chemicals such as fertilizers or other harsh solvents.
Do not expose the plastic parts of the unit to brake fluids, petrol, petrol-based products,
penetrating oils or the like.
6.10.3.
These products are often highly corrosive and may cause permanent damage, weaken or
destroy the plastic parts of your pole chain saw.
6.10.4.
When not in use, your cordless pole chain saw should be stored indoors in a dry and high or
locked-up place, out of the reach of children.
6.11.
Charging the battery.
6.11.1.
Remove the battery from the machine,
6.11.2.
To recharge the battery,
6.11.2.1.
Connect the battery charger (1) to a mains power socket; a green power light (3) will
come on indicating there is voltage.
6.11.2.2.
Insert the battery pack (2) into the battery charger (1), pushing it in completely.
Recharging a completely flat battery requires approximately 100 minutes.
Check that the socket mains voltage is the same as that indicated on the battery
charger plate.
Remove the battery and wait at least five minutes for the saw to cool before
servicing or storing your unit.
If you drop the saw, carefully inspect it for damage. If the guide bar is bent, the
housing is cracked, the handle is broken or if you see any other condition that may
affect the saw’s operation, DO NOT USE the tool.
Page 23
Ver 2
Summary of Contents for HYPS36LI
Page 1: ......